Structural · Strengthening · Seismic · Restoration EST. 2010 · ATAŞEHIR / İSTANBUL · ISO 9001:2015 +90 216 575 32 79

What Is a Structural Design?

What is a structural design?

A structural design is the engineering project that defines, calculates and details every load-bearing element of a building. It is prepared by a civil engineer in line with the architectural design, the soil investigation and geotechnical report, and the intended use of the building.

The structure is analysed according to the applicable codes and the principles of engineering science, with a model that reflects reality as closely as possible. The loads and parameters used in the calculations must match real conditions; otherwise the building may be put at risk by a load case that was never accounted for. Calculations should be carried out with reliable, up-to-date software, and key results should be verified by hand calculations to catch input or software errors.

A structural design must be prepared by a civil engineer registered with the Chamber of Civil Engineers. The designer must be able to read the architectural drawings thoroughly, and every other discipline on the project should in turn be able to read the structural drawings.

What does a structural design include?

  • Structural calculations and analysis report
  • Construction methodology and detailing rules
  • Foundation and floor formwork plans and setting-out drawings
  • A sufficient number of sections
  • Reinforcement and fabrication details for reinforced concrete or steel foundations, columns, beams, shear walls and slabs (in 3D where possible)
  • A 3D model and renderings of the structure where possible
  • Drawings at the required scales (1/50, 1/25, 1/10, 1/5)
  • Delivery in both digital and printed form

How does the design process work?

  1. Taking the soil and geotechnical report into account, the civil engineer prepares a preliminary structural layout and analysis based on the architectural design and shares it with the architect.
  2. The architect develops and reissues the design, incorporating the engineer's work and proposals for the load-bearing elements (columns, beams, shear walls…).
  3. The civil engineer develops the structural design further on the basis of the updated architecture and reissues the preliminary design.
  4. Once this coordination loop is complete, all disciplines finalise their drawings on the approved architectural design.